The thin-bottom paper-type fragile paper self-adhesive face material is suitable for printing and processing in the form of roll paper on the labeling machine. Due to the low strength of the face material, the fragile paper is only printed and die-cut without waste discharge; the finished label is only cut, no longer volume. Therefore, the self-adhesive labels of fragile paper cannot be automatically labeled, and they are all manually labeled.
Thin-bottom paper-type fragile paper self-adhesive face materials should not be printed in single sheet form, because the roll material will accelerate the shrinkage of the face material after cutting, cause the bottom paper to deform, form a gap between the bottom paper and the face material, and the glue is affected by the environment Overflow will cause the face material to break during the printing process, which will increase the number of waste labels and increase the wastage.
It is recommended to use resin-based ink letterpress printing and flexographic water-based ink printing for the fragile paper surface material of the reel.